[1]程 春,杜忠华,陈 曦,等.壳体刻槽PELE冲击破碎数值模拟[J].弹道学报,2019,(03):92.[doi:10.12115/j.issn.1004-499X(2019)03-017]
 CHENG Chun,DU Zhonghua,CHEN Xi,et al.Numerical Simulation for Impact Fragmentation of Jacket Grooved PELE[J].Journal Of Ballistics,2019,(03):92.[doi:10.12115/j.issn.1004-499X(2019)03-017]
点击复制

壳体刻槽PELE冲击破碎数值模拟()
分享到:

《弹道学报》[ISSN:1004-499X/CN:32-1343/TJ]

卷:
期数:
2019年03期
页码:
92
栏目:
出版日期:
2019-09-30

文章信息/Info

Title:
Numerical Simulation for Impact Fragmentation of Jacket Grooved PELE
文章编号:
1004-499X(2019)03-0092-05
作者:
程 春1杜忠华1陈 曦1徐立志1隋红霞2徐同昆2
1.南京理工大学 机械工程学院,江苏 南京 210094; 2.黑龙江北方工具有限公司,黑龙江 牡丹江 157013
Author(s):
CHENG Chun1DU Zhonghua1CHEN Xi1XU Lizhi1SUI Hongxia2XU Tongkun2
1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China; 2.Heilongjiang North Tools Co. Ltd.,Mudanjiang 157013,China
关键词:
横向效应侵彻弹丸 冲击破碎 数值模拟
Keywords:
penetrator with lateral effect impact fragmentation numerical simulation
分类号:
TJ410.3
DOI:
10.12115/j.issn.1004-499X(2019)03-017
摘要:
为研究刻槽参数对横向效应侵彻弹丸(PELE)冲击破碎的影响规律,采用光滑粒子流体动力学方法,利用Johnson-Cook本构模型,引入最大主应力失效和随机失效准则,建立数值模拟模型,对PELE壳体的冲击破碎过程进行模拟,并试验验证了数值模拟模型的有效性。利用均匀设计方法确定刻槽数量、刻槽角度、刻槽深度的因素水平表和数值模拟方案,分析壳体的破碎情况。研究结果表明:该文采用的数值模拟模型能够有效模拟PELE的壳体破碎情况,壳体刻槽PELE侵彻贯穿靶板过程中,壳体的纵向断裂和破碎基本沿着刻槽位置开始,壳体破碎产生的碎片多为长条状。壳体破碎程度随刻槽数量的变化呈抛物线趋势变化,随刻槽角度的增大而减小,与刻槽数量、刻槽深度的乘积正相关。该文采用的数值模拟模型和研究方法可用于研究固体材料的冲击破碎。
Abstract:
In order to study the influence of groove parameters on impact fragmentation of penetrator with lateral effect(PELE),the smoothing particle hydrodynamics method,Johnson-Cook strength model,the maximum principal stress failure and stochastic failure criteria were used to establish numerical model to simulate the fragmentation of projectile. The validity of the numerical model was verified by experimental results. The uniform design method was used to design the numerical simulation program and the level table of the number of grooves,groove angle,groove depth,and the fragmentation of projectile was analyzed. The research results show that the fragmentation of PELE can be effectively simulated by the numerical model; the longitudinal fracture of projectile jacket begins along the grooves,and the fragments produced by the fragmentation of projectile jacket are mostly long strips. The fragmentation degree of the projectile changes parabolically with the number of grooves and decreases with the increase of groove angle,and it is positively related to the product of groove number and groove depth. The numerical calculation model and research method can be used to study the impact fragmentation of solid materials.

参考文献/References:

[1] PAULUS G,SCHIRM V. Impact behaviour of PELE projectiles perforating thin target plates[J]. International Journal of Impact Engineering,2006,33(12):566-579.
[2]徐立志,杜忠华,杜成鑫,等. 壳体切缝的结构参数对PELE横向效应的影响[J]. 含能材料,2016,24(8):742-746.
XU Lizhi,DU Zhonghua,DU Chengxin,et al. Effect of structure parameters of the jacket breakage on lateral effect of PELE[J]. Chinese Journal of Energetic Materials,2016,24(8):742-746.(in Chinese)
[3]BENZ W,ASPHAUG E. Simulations of brittle solids using smooth particle hydrodynamics[J]. Computer Physics Communications,1995,87(1):253-265.
[4]RANDLES P W,LIBERSKY L D. Smoothed particle hydrodynamics-some recent improvements and applications[J]. Computer Methods in Applied Mechanics & Engineering,1996,139(4):375-408.
[5]MOXNES J,STEINAR B. Simulation of natural fragmentation of rings cut from warheads[J]. Defence Technology,2015,11(4):319-329.
[6]KONG X,WU W,LI J,et al. A numerical investigation on explosive fragmentation of metal casing using smoothed particle hydrodynamic method[J]. Materials & Design,2013,51(60):729-741.
[7]LUO R,HUANG D,YANG M,et al. Penetrating performance and“self-sharpening”behavior of fine-grained tungsten heavy alloy rod penetrators[J]. Materials Science & Engineering A,2016,675:262-270.
[8]WANG M,HUANG D W,LUO R M. Shear failure of tungsten alloy at mesoscale modeled by movable cellular automata[J]. Theoretical & Applied Fracture Mechanics,2011,56(3):162-168.
[9]VERREAULT J. Analytical and numerical description of the PELE fragmentation upon impact with thin target plates[J]. International Journal of Impact Engineering,2015,76(1):196-206.
[10]BOSE A,SIMS D,GERMAN R M. Test temperature and strain rate effects on the properties of a tungsten heavy alloy[J]. Metallurgical Transactions A,1988,19(3):487-494.
[11]CHURN K S,GERMAN R M. Fracture behavior of W-Ni-Fe heavy alloys[J]. Metallurgical Transactions A,1984,15(2):331-338.
[12]TANG S B,ZHANG H,TANG C A,et al. Numerical model for the cracking behavior of heterogeneous brittle solids subjected to thermal shock[J]. International Journal of Solids and Structures,2016,80(3):520-531.
[13]GRADY D E,OLSEN M L. A statistics and energy based theory of dynamic fragmentation[J]. International Journal of Impact Engineering,2003,29(10):293-306.

备注/Memo

备注/Memo:
收稿日期:2019-02-18
基金项目:国家自然科学基金项目(11802141); 江苏省研究生科研与实践创新计划项目(KYCX18-0465)
作者简介:程春(1989- ),男,博士研究生,研究方向为毁伤机理与终点效应。E-mail:xiangchun893@163.com。
更新日期/Last Update: 2019-09-30